375mls Sabre Fix PS Adhesive - Cartridge - Beige

SabreFix PS is a premium grade, solvent-based panel construction adhesive, that is fast-drying and builds up strength quickly on contact. SabreFix PS is suitable for use on most common construction materials and is safe for use on polystyrene panels. Ideal for fixing wallboards, polystyrene panels, and acrylic shower linings. Applications: Polystyrene panels Acrylic shower linings Wallboards Mirror backings Aluminium Cement sheet Concrete Plasterboard Steel Timber including LOSP treated timber Most common building panel materials How to Use: Substrate Preparation Ensure substrates are clean, dry, and free of dust and grease. General Application – Low Stress Loading Cut the tip of the nozzle at a 45° angle to give a 5mm bead. Apply a continuous bead of adhesive every 300 – 400mm along the fixing surface. Immediately press the two surfaces together to ensure good surface wetting. Prop if necessary and allow to dry for 2 to 4 hours before removing prop. Polystyrene Application Apply as above, but after ensuring good surface wetting, the materials should be separated for up to 5 minutes to allow most of the solvent to escape. The surfaces are then pressed back together for final bond. Heavy Materials - High Stress Loading Apply a 4mm bead along all mating surfaces (total coverage) and immediately bring the two surfaces together. Nail the surfaces around the perimeter, sufficient to hold the two materials together for a minimum of eight hours.